Plexi Breed is a pedal capable of reproducing the sound of the heads that made rock history. The sounds of the plexi amp heads have been widely used for a long time and were used by most of our guitar heroes. 3 accurately reproduced Plexi amps. A toggle switch on the Plexi Breed allows you to select the 3 best known Plexi amps by simply moving this lever. - JTM recreates the circuitry of the JTM45 evoking, above all, the reaction of the rectifier valve, giving to the guitarist the typical sag attributed to this valve in the power supply circuit - 1959, recreates the sound of the 100W Plexi named 1959. A powerful amp with a very high headroom and a very detailed focus - 1987, recreates the features of the 1987 50W Plexi, different from the 100W in order to obtain a slightly more pronounced distortion and an even faster attack The remaining controls are shared by all 3 modes: - Normal: sets the gain of the Normal channel, characterized by a strong body response and a unique punch on the low-end frequencies - High Treble: sets the gain of the brightest channel focused on the mid-high frequencies - Tone: allows a general correction to the overall tone, low values ​​offer a darker sound, high values ​​for a sharper sound - Volume: sets the overall volume of the pedal *Product names and trademarks are the property of their respective holders that do not endorse and are not associated or affiliated with MOD Audio or Colombo Audio Electronics; they were used merely to identify the product whose sound was incorporated in the creation of this plugin. Features: Plugin by MOD Audio & Colombo Audio Electronics Based on RTNeural by Jatin Chowdhury